I picked up this beauty at ECCC. This is a port expander for the IEC Bus - it has one input for a Commodore computer and can control up to four other IEC devices (such as disk drives, printer, uIEC, etc.). The first switch turns on/off burst mode and controls the input reset. You can turn on / off the ATN/RST of any of the four devices with the other four switches. The push button resets the devices which are on. See the next picture for the front.
The CommodoreServer Font allows you to view PETSCII characters on our Website.
Newsletter Sign-UpSign up for our newsletter to receive the latest news and event postings.
V-1541To access CommodoreServer.com from your Commodore 64 computer, you need to run the V-1541 program on your C64. You may download the V-1541 disk image, but you will need to transfer it to a floppy disk. You will also need an Internet modem that supports RS-232 to Ethernet, such as the Comet64 Internet Modem.
Getting StartedQuick links to get started using CommodoreServer.com
Help & Features
Leave a Comment
You must be signed-in to post comments.Thumper 9/27/2012
Each output port switch has 2 functions. The first being switching the ATN line On or OFF. The second is switching the Reset On or Off for the respective port. Ever had a directory or a D64 image open and needed to reset a drive. you can dot that with